AIR KING UNIVERSAL COUPLINGS ("CP" COUPLINGS)

Air King is for air service only!

		Malleable Iron	Brass	316 S/S
Hose Ends	Size	Part #	Part #	Part #
	3/8"	AMH	ABH	RAMH
	1/2"	AM1	AB1	RAM1
	5/8"	AM5	AB5	-
	3/4"	AM6	AB6	RAM6
	1"	AM11	AB11	RAM11
Male NPT Ends	1/4"	AMB1	ABB1	-
	3/8"	AMB	ABB	RAMB
	1/2"	AM2	AB2	RAM2
	3/4"	AM7	AB7	RAM7
	1"	AM12	AB12	RAM12
Female NPT Ends	1/4"	AMC1	ABC1	-
	3/8"	AMC	ABC	RAMC
	1/2"	AM3	AB3	RAM3
	3/4"	AM8	AB8	RAM8
	1"	AM13	AB13	RAM13
Blank Ends		AM0	AB0	RAM0
Triple Connections		AM10	AB10	-

**Air King Safety Pins**
Wire Diameter	Part #
.058"	AKSP1
.091"	AKSP25

**Air King Washers**
Description	Part #
Rubber	AWR4
Neoprene	AWS6

Safety Clips	S/S Safety Clips	Lanyards
AC1	AC7	ACL8

Note: The use of an Air King Safety Clip or wire type retainer is necessary to assure Air King Universal Couplings will not become accidently disconnected. This guarantees the fittings are properly connected as the pin will not go through holes in mating flanges until couplings are locked in place. Only one Air King Safety Clip or wire type retainer is required for each Air King Universal Coupling. Note: Air King is rated to 110 PSI. Standard Air King fittings come with AWR4 washers. Note: Air King available to meet Mil Spec. WWC-633D on special order.

Air King Hose Ends with Ferrules

Size	Hose OD Range		Malleable Iron	316 S/S
Size	From:	To:	Part #	Part #
1/2"	27/32"	1-1/32"	AM1WF	RAM1WF
3/4"	1-1/16"	1-11/32"	AM6WF	RAM6WF
1"	1-18/64"	1-34/64"	AM11WF-1	-
1"	1-30/64"	1-46/64"	AM11WF	RAM11WF

Note: Malleable Iron and Stainless Steel Air King Couplings with Carbon Steel Ferrules can be crimped or swaged on. Please call our Customer Service Department for crimp or swage diameter recommendations. Rated to 110 PSI Working Pressure.

**3/4" Male Air King with Gauge Port**
Part #	Material
AM7T	Malleable Iron
RAM7T	Stainless Steel

Note: Drilled to 1/4" NPT for mounting gauge. Gauge is not included.

**Air King Universal Swivels**
Size	Part #
1/2" Male NPT	AM2SWIV
3/4" Hose End	AM6SWIV
3/4" Male NPT	AM7SWIV
3/4" Female NPT	AM8SWIV

Note: These Malleable Iron Universal Swivel fittings interchange with other Air King fittings and include a heavy-duty, free-turning joint that will swivel under pressure to prevent hose kinking. Working Pressure is 110 PSI. For Air Service Only!

King 4-Lug Quick-Acting Couplings


4-Lug Fittings	Size	Malleable Iron	Brass
4-Lug Fittings	Size	Part #	Part #
Hose Ends	1-1/4"	AM16	AB16
	1-1/2"	AM21	AB21
	2"	AM26	AB26
Female NPT Ends	1-1/4"	AM18	AB18
	1-1/2"	AM23	AB23
	2"	AM28	AB28

Washers: (Fits all 4-Lug Fittings) Part # AWR14 Warning: For water service only. Not to be used for steam service! Note: Safety Clips are the same size for both 2-lug and 4-lug couplings. Use Safety Clips on all Universal Coupling applications.